Features & Benefits 

▪ Basic coated electrode with excellent welding characteristic and positional welding 

▪ Tough weld with high impact strength at -45  ̊C. 

▪ Weld metal recovery about 115%, thus higher productivity. 

▪ Extremely good slag detachability thus greater welder comfort. 

▪ Low spatter and finely rippled bead with regular profile reduces dressing work. ▪ Weld of consistent radiographic quality is achieved. 

Typical analysis (wt. – %), As Welded 

C Si Mn P S Cr Mo Ni 

0.05 0.50 1.20 0.024 0.012 0.03 0.01 0.02 

Typical Mechanical properties of all-weld metal 

Heat condition 

treatment 

Yield strength strength Tensile 

Elongation (L0=4d0) 

Impact Strength @ -45 ̊C 

All information provided is based upon careful investigation and intensive research. However, we do not assume any liability for correctness and information is subject to change without notice. 

Diffusible 

Content H2 MPa MPa % J HBW mL/100g 

As Welded 465 562 29 100 <200 <4.0 

Operating data 

Polarity Re-drying/baking 

conditions: Redry electrodes at 300- 350  ̊C for 2 hrs before use 

Hardness 

Ø(mm) L Amps 2.5 350 80-110 3.15 350/450 100-140 4.0 450 130-180 5.0 450 180-230 

Size & Packaging 

Size Kg./Pack Kg./Box 2.5×350 5.0 20.0 3.15×350/450 5.0 20.0 4.0×450 5.0 20.0 5.0×450 5.0 20.0