HYSIL PIPE SECTION

HYSIL PIPE COVERING (HALF ROUND)

HYSIL PIPE COVERING
(Half Round)

Available for pipe sizes 1/2″ to 8″

Standard length : 450/600 mm

Thickness : 25, 40, 50, 65, & 75 mm

HYSIL PIPE COVERING (CURVED SEGMENTS)

HYSIL PIPE COVERING
(Curved Segments)

Available for pipe sizes 10″ to 24″

Standard length : 600 mm

Thickness : 25, 40, 50, 65, & 75 mm

HYSIL PIPE COVERING (BEVELLED LAGS)

HYSIL PIPE COVERING
(Bevelled Lags)

Available for pipe sizes 26″ and above

Standard length : 600 mm

Thickness : 25, 40, 50, 65, & 75 mm

H-1000 GRADE BLOCKS & PIPES

PHYSICAL PROPERTIESUNIT SPECIFICATION TYPICAL VALUE TEST PROCEDURE
        
Dry Bulk Densitykg/m³ 220 – 280 250 IS : 5688
        
Flexural strengthkN/m² (min) 350 380 IS : 5688
        
*Compressive Strength, reduction in thickness(%) not to exceed :      
   
I) dry under a load of 415 kN/m² 5.0 1.7 IS : 5688
II) wet (after 18 hrs immersion in water ) under a load of 170 kN/m² 5.0 1.9 IS : 5688
      
        
As shipped Moisture Content, by weight %, (max) 7.5 5.0 IS : 9428
        
Alkalinity pH 8 – 11 9.5 IS : 9428
        
        
THERMAL PROPERTIESUNIT SPECIFICATION TYPICAL VALUE TEST PROCEDURE
        
Heat Resistance       
I) Linear Shrinkage(length) at 950°C/12 Hrs., % (max) 2.0 1.8 IS : 5724
II) Loss In Mass,% (max) 12.0 10.0 IS : 5724
*III) Compressive Strength, reduction in thickness(%) not to exceed under a load of 345 kN/m² 5.0 1.8 IS : 5688
      
        
Thermal Conductivity at mean temperature,
W/mK (max)
     IS : 9490
300 °C  0.078 0.074  
400 °C  0.097 0.094  
500 °C  0.118 0.114  
        
* Testing shall be carried out on Flat Blocks in case of Pipe Sections.
Packaging : Polythene Shrink wrap Packing / Cardboard Box Packing / Pallet Packing
Dimensional Tolerance : As per IS 9428